Russian
production

Gift
box

1 year
warranty

Convenient
cashless
payment

Sharpening fixture “Profile”

Perfect sharpening without blade damage that doesn't require special skills

Sharpening fixture "Profile" allows to rich high parameters of blade sharpness. Through the multi-stage sharpening using the "Profile" system, consistently replacing coarse abrasives to smaller, you get almost perfect sharp blade.

For who fit «the Profile»?

Perfect sharpening without blade damage that doesn't require special skills.

To get a consultation

For fans of perfect sharpening

Sharpening fixture «Profile» allows to rich high parameters of blade sharpness. Through the multi-stage sharpening using the "Profile" system, consistently replacing coarse abrasives to smaller, you get almost perfect sharp blade.

For master grinder man

The «Profile» allows to sharpen quick and lightly blades of very different tools that allows to use it for professional sharpen.

For owner of expensive knifes

In contrast to the «kitchen» sharpening "Profile" doesn't tears but grinds, cleans the blade without damaging it.

Equipment and Prices

Start K01

Sharpening fixture «Profile» (base)

  • Single clamp
  • Double clamp
  • Wooden box Profile
Buy for $ 246

Base K02

Sharpening fixture «Profile» K02 (base)

  • Single clamp K02
  • Double clamp K02
  • Professional set of keys
  • Wooden box Profile
Buy for $ 314

Standart K02

Sharpening fixture «Profile» K02 (base)

  • Single clamp K02
  • Double clamp K02
  • Plate
  • Abrasives «Profile»
  • Professional set of keys
  • Wooden box Profile
Buy for $ 395

Standart Black + RP

Sharpening fixture «Profile» K02 (base)

  • Rack and pinion hoist
  • Single clamp K02
  • Double clamp K02
  • Plate
  • Abrasives «Profile»
  • Professional set of keys
  • Anodizing all AL elements
  • Wooden box Profile
Buy for $ 504

Gift Black

Sharpening fixture «Profile» K02 (base)

  • Single clamp K02
  • Double clamp K02
  • Double clamp K02 low angle
  • Attachment for scissors and straight knives
  • Plate
  • Professional set of keys
  • Double-sided leather strop on the blank (yuft)
  • Abrasives «Profile»
  • Digital angle protractor TSPROF
  • Set of Dialux polishing pastes
  • Magnifier
  • Case
  • Anodizing all AL elements
Buy for $ 670

Gift Black + RP

Sharpening fixture «Profile» K02 (base)

  • Rack and pinion hoist
  • Single clamp K02
  • Double clamp K02
  • Double clamp K02 low angle
  • Attachment for scissors and straight knives
  • Plate
  • Professional set of keys
  • Double-sided leather strop on the blank (yuft)
  • Abrasives «Profile»
  • Digital angle protractor TSPROF
  • Set of Dialux polishing pastes
  • Magnifier
  • Case
  • Anodizing all AL elements
Buy for $ 759

LE BLACK base

LE BLACK base

  • All milled clamps
  • Abrasives «Profile» 120,220,400
  • ZIP LE
  • Clamp 50 mm
  • Box TSPROF
  • Anodizing
Buy for $ 320

LE BLACK extended

LE BLACK extended

  • All milled clamps
  • Abrasives «Profile» 120,220,400,600,1000 (without a cover)
  • Electronic protractor
  • Wrench 1 piece 4 mm
  • ZIP LE
  • Clamp 50 mm
  • Box TSPROF
  • Anodizing
Buy for $ 362

Configurator

Collect your individual equipment

Profile

Specify the type of profile

$ 254

Body, hinge joint, abrasive holder, a parking device, clamp, wrenches, manual. Clamps are not included.

$ 0

Order

Clamp for blade

$ 0

$ 36

Single clamp

Rotating symmetric clamp for double-sided sharpening without knife repositioning. The clamp system allows to clamp the knifes with complex blade geometry hard and symmetrically. The jaw width is 32mm. It is recommended to use for short knives sharpening with length till 150mm.

$ 55

Double clamp

There is a rotating symmetric clamp for double-sided sharpening without knife repositioning. The clamp system allows to clamp knifes with complex blade geometry hard and symmetrically. It has a mechanism for independent repositioning of clamping jaws. The minimum distance between the jaws is 40 mm, the maximum is 130 mm. The width of each jaw is 16mm. It is recommended to use for sharpening of long and thin blades.

$ 35

Removable table

It is meant for free manual repositioning of the blade without the use of clamps that allows manually to control the sharpening process and also to sharpen the blade with irregular geometry. The table is equipped with a removable stop plate.

$ 35

Attachment for scissors and straight knives

It must be mounted on the frame of double clamp. Due to vertical mounting of blade and adjustment mechanism, this attachment expands the range of adjustment of sharpening angles that allows to sharpen cutting tools with a large angle of 50 to 80 degrees.

$ 60

Double clamp with reduced angle

Special clamp for fine fillet knives with a reduced sharpening angle. Thin clamp jaw are made of constructional spring steel that gives enough clamping force. The clamp with modified configuration of jaws and with use of special screws has the minimum limit of sharpening angle of 6.5 degrees to the side.

$ 45

Single clamp with reduced angle

Special clamp for fine fillet knives with a reduced sharpening angle. Thin clamp jaw are made of constructional spring steel that gives enough clamping force. The clamp with modified configuration of jaws and with use of special screws has the minimum limit of sharpening angle of 6.5 degrees to the side.

$ 80

Double cone clamp with the frame

Cone pair of clamps with screw drive mechanism multiplies the compression of jaws many times reducing the load on the screw. The power compression is to make manually by lighter rotation of side handle excluding the using of additional wrenches.
Cone clamp makes better the symmetry of compression due to distribution of equal elastic forces on the power springs. The cones are made of high temperature processing steel with the hardness of 47...52 HRC that provides the durability of this unit.
The clamping jaws are made of spring steel 65G with the following post-heat treatment 30...35 HRC.
- Number of jaws: 2 pcs
- Width of jaws: 16 mm
-​ Minimum distance between jaws: 20 mm
-​ Maximum distance between jaws: 170 mm
Double clamp is recommended for knifes with the thickness of 1 to 3,5 mm (including the board from the spine) and the length 300-350 mm.

Abrasives for sharpening

$ 0

$ 45

Abrasives «Profile»

The set includes 5 whetstones on the aluminum blank with chamfer of 45 degrees and universal case. Such set suffices for all kinds of the work. Stones:
- F120 25х6mm.
- F230 25х6mm.
- F400 25х6mm.
- F600 25х6mm.
- F1000 25х6mm.
Silicone carbide abrasive grit for smoothing stone surface:
- F60- (50-100g)
- F230- (50-100g)
- F400 -(50-100g
- F600 -(50-100g)
The material of stones is the green silicon carbide 64C. The bond is ceramic. It must be wet, by working it must be used with water. It can be used with oil; the ceramic bond will not be damaged by oil. The stones are very universal and suitable for grinding a wide range of steels, including solid and powder steel with hardness above 60 HRC.

$ 95

Set of Boride stones, mixed series

Boride is well-known brand on the abrasives market. Boride offers professional sharpening and polishing stones of different sizes and of different materials. In Boride’s assortment you can find abrasives for absolutely any kitchen knife. The forty years experience of manufacturing company gives guarantee, that sharpening and polishing instruments of this brand will prolong the life of even the most brittle blades.
- Ruby 150 1/4*1*6" - Ruby 220 1/4*1*6" - AS-9 320 1/4*1*6" - Golden Star 600 1/4*1*6" - T2 1000 1/4*1*6"

$ 45

Set of Boride T2 narrow sharpening stones

Narrow stones are more suitable for sharpening S-curve cutting rim, concave blade and cutting tools of small size.
Size: 1/8 x 1/2 x 6
Grit: 320, 400, 600, 800, 1000, 1200

$ 105

Set of Boride T2 series stones

T2 blue series stones are made of aluminum oxide and use very strong bond. As a result, these stones are high performance and their wear rate is below average. Boride recommends T2 as the best series for working with stainless steel.
- T2 150 1/4*1*6" - T2 220 1/4*1*6" - T2 320 1/4*1*6" - T2 600 1/4*1*6" - T2 800 1/4*1*6" - T2 1200 1/4*1*6"

$ 40

Set of Boride CS-HD narrow sharpening stones

Narrow stones are more suitable for sharpening S-curve cutting rim, concave blade and cutting tools of small size.
Size: 1/8 x 1/2 x 6
Grit: 320, 400, 600, 800, 1000, 1200

$ 55

Set No 3

Diamond bar of Russian production made by Venev industrial diamonds plant. The diamond stone is double sided. The two sides have different grit that makes the stone more universal. There are markings on the sides with the value of the grit according to State Standard scale. Double sided Venev diamond bars with diamond concentration of 25%, the size of 200*35*10. Grain is in microns:
- 1st bar 160/125- 50/40 - 2nd bar 20/14-7/5
* Leather cases are sold separately for 100 rubles/pcs. (Indicate it in the message to the manager while filling the order form).

$ 15

Abrasive paper

Grain P180 P240 P400 P600 P1000, size 28h230 mm. Waterproof abrasive paper 3M Wetordry of 734 series, it is produced with using silicon carbide minerals with extremely high cutting capacity. It is intended for manual grinding with water.
Microthin abrasive paper 3M of 401Q series. Grain is P1500 and P2000, size is 28h230 mm.

$ 15

Set of Dialux polishing pastes

Set of Dialux polishing pastes. Gray paste is for stainless steel, it has coarse grain. White is the universal finishing paste for all types of metal.

$ 25

Leather strop for refinement with a handle (yuft)

Leather strop is intended for final refinement of knife cutting edge. The inner side of leather is to paste with polishing paste (various companies provided as a rule a green paste; it can used GOI polishing paste). The correction of knife is to make by gently sliding in line with sharpening angle. The smooth side of leather is to use without paste or with finishing (white) paste. Easy steps can bring the blade of knife to the razor sharpness. The main thing here is not to overdo it and to polish the cutting edge not to a convex lens. The knife will shave, but not so good to cut.

$ 15

Double-sided leather strop on the blank (yuft)

Leather strop is intended for final refinement of knife cutting edge. Leather corrects unevenness of cutting rim and makes it stronger. Working surface is made of very smooth, high quality leather, mounted on a wooden blank. Size 170х30х10 mm

$ 15

Leather on the aluminum form 1 piece

Form a leather for the final finishing of the blade cutting edge with. Leather corrects uneven cutting edge, and amplifies it. The working surface is made of a very smooth high quality cowhide, glued to form a durable aluminum. Work blank leather only on themselves. Length of form 150mm, width 25mm, thickness of the leather 3mm thickness 3mm blank

$ 8

Grinding the silicon carbide grains

Grinding the silicon carbide grains

$ 10

Liquid abrasive stones (50 ml)

Branded cutting fluid (coolant) from the company TC Profile, Russia, specifically designed for abrasive bars of different models. Coolant easier to work on the stone edge eliminates local overheating during prolonged monotonous work, improves the performance of stones, reduces clogging and wear different types of stones.
Non-toxic;
Environmentally friendly;
Biorazlogaemy;

Additional accessories

$ 0

$ 115

Case

Convenient packaging for storage and transporting the «Profile» with accessories.

$ 5

Case for diamond stones

Case for diamond stones.

$ 50

Digital angle protractor

The range is 0-360°, the accuracy is 0,1°. Solid aluminum case, large and bright LCD screen, magnets for hard fixation on the surface, functions of calibration and measurement's storage.

$ 20

Holder for angle protractor

Modern digital angle protractors have a small size, built-in magnets, high accuracy (a few tenths of degree), with the function of angular spatial memory, they are affordable. It is obvious that the use of digital angle protractors in sharpening devices in which the main parameter of the geometrical measurements is the angle is fully justified.

$ 8

Wrenches for clamps 3 pcs

Additional Torx wrenches T8, T10 and T15 for usability of clamps.

$ 45

Plate

Metal base is intended to hold the sharpening fixture on the working surface of a table or workbench. It serves to hold the device body on the working surface without use any clamps. It makes it possible to place the system “Profile” without using the edge of the worktable. It is also useful in case if the use of clamps is difficult. The design of base is made in accordance to the style of all system, it perfectly completes the construction giving the device stability and giving the user surety and comfort during the sharpening process. For the purpose to fix your device on the plate set it in the specially provided place and tighten fixing screws. The screw heads are made in the form of butterfly and are to tighten by hand without the use of any special keys. When the process is finished loosen the screws and remove the device chassis from the plate.

$ 8

Glue for blanks, spray 75 ml

Glue for blanks, spray 75 ml

$ 10

Aluminum blanks (5 pcs)

Aluminum blanks for stones and leather 155x25mm with chamfer of 45 degrees.

$ 10

Blanks of Plexiglas for emery paper, leather 5 pcs

Blanks of Plexiglas with a thickness of 6mm intended for the abrasive’s size 170x30. It can be used with emery paper, leather or stones for stiffening.

$ 50

Narrow holder for abrasives

Narrow holder for holding narrow and not large abrasives.

$ 15

Case for abrasive stones

It is soft and strong nylon case for transporting of abrasive stones. Case is optimized for 6 pieces. The maximum length of stones is 160 mm. The case has Velcro strips for closing the content. The case has the firm’s stripe «TS Profile».

$ 10

60x illuminated pocket microscope

An indispensable tool for control the blades in every detail. It allows to look for sharpening burrs, to control sharpening angle across the all length of the blade, to objectively assess the sharpness and polishing of the blade, see blade with high magnification and achieve a perfect sharpening.

$ 10

40x illuminated magnifier

An indispensable tool for control the blades in every detail. It allows to look for sharpening burrs, to control sharpening angle across the all length of the blade, to objectively assess the sharpness and polishing of the blade, see blade with high magnification and achieve a perfect sharpening.

$ 33

Digital USB microscope

It allows to make photos of blade with magnification up to 500 times. Share your experience in sharpening knives, discuss sharpening results with your colleagues, and make photos of perfectly knife edge, compare the different techniques of sharpening, abrasives and grinding apparatuses.

Clamp for blade

$ 0

$ 50

Removable table

It is meant for free manual repositioning of the blade without the use of clamps that allows manually to control the sharpening process and also to sharpen the blade with irregular geometry. The table is equipped with a removable stop plate.

$ 40

Double clamp K02

Double clamp

$ 30

Single clamp K02

Single clamp K02

$ 46

Double clamp K02 with reduced angle

Double clamp K02 with reduced angle

$ 40

Single clamp K02 with reduced angle

Single clamp K02 with reduced angle

$ 35

Attachment for scissors and straight knives

It must be mounted on the frame of double clamp. Due to vertical mounting of blade and adjustment mechanism, this attachment expands the range of adjustment of sharpening angles that allows to sharpen cutting tools with a large angle of 50 to 80 degrees.

$ 72

Double cone clamp with the frame

Cone pair of clamps with screw drive mechanism multiplies the compression of jaws many times reducing the load on the screw. The power compression is to make manually by lighter rotation of side handle excluding the using of additional wrenches.
Cone clamp makes better the symmetry of compression due to distribution of equal elastic forces on the power springs. The cones are made of high temperature processing steel with the hardness of 47...52 HRC that provides the durability of this unit.
The clamping jaws are made of spring steel 65G with the following post-heat treatment 30...35 HRC.
- Number of jaws: 2 pcs
- Width of jaws: 16 mm
- Minimum distance between jaws: 20 mm
- Maximum distance between jaws: 170 mm
Double clamp is recommended for knifes with the thickness of 1 to 3,5 mm (including the board from the spine) and the length 300-350 mm.

$ 98

Rack and pinion hoist

Designed for accurate and smooth adjustment and setting the angle of sharpening.

Abrasives for sharpening

$ 0

$ 45

Abrasives «Profile»

The set includes 5 whetstones on the aluminum blank with chamfer of 45 degrees and universal case. Such set suffices for all kinds of the work. Stones:
- F120 25х6mm.
- F230 25х6mm.
- F400 25х6mm.
- F600 25х6mm.
- F1000 25х6mm.
Silicone carbide abrasive grit for smoothing stone surface:
- F60- (50-100g)
- F230- (50-100g)
- F400 -(50-100g
- F600 -(50-100g)
The material of stones is the green silicon carbide 64C. The bond is ceramic. It must be wet, by working it must be used with water. It can be used with oil; the ceramic bond will not be damaged by oil. The stones are very universal and suitable for grinding a wide range of steels, including solid and powder steel with hardness above 60 HRC.

$ 95

Set of Boride stones, mixed series

Boride is well-known brand on the abrasives market. Boride offers professional sharpening and polishing stones of different sizes and of different materials. In Boride’s assortment you can find abrasives for absolutely any kitchen knife. The forty years experience of manufacturing company gives guarantee, that sharpening and polishing instruments of this brand will prolong the life of even the most brittle blades.
- Ruby 150 1/4*1*6" - Ruby 220 1/4*1*6" - AS-9 320 1/4*1*6" - Golden Star 600 1/4*1*6" - T2 1000 1/4*1*6"

$ 45

Set of Boride T2 narrow sharpening stones

Narrow stones are more suitable for sharpening S-curve cutting rim, concave blade and cutting tools of small size.
Size: 1/8 x 1/2 x 6
Grit: 320, 400, 600, 800, 1000, 1200

$ 105

Set of Boride T2 series stones

T2 blue series stones are made of aluminum oxide and use very strong bond. As a result, these stones are high performance and their wear rate is below average. Boride recommends T2 as the best series for working with stainless steel.
- T2 150 1/4*1*6" - T2 220 1/4*1*6" - T2 320 1/4*1*6" - T2 600 1/4*1*6" - T2 800 1/4*1*6" - T2 1200 1/4*1*6"

$ 40

Set of Boride CS-HD narrow sharpening stones

Narrow stones are more suitable for sharpening S-curve cutting rim, concave blade and cutting tools of small size.
Size: 1/8 x 1/2 x 6
Grit: 320, 400, 600, 800, 1000, 1200

$ 55

Set No 3

Diamond bar of Russian production made by Venev industrial diamonds plant. The diamond stone is double sided. The two sides have different grit that makes the stone more universal. There are markings on the sides with the value of the grit according to State Standard scale. Double sided Venev diamond bars with diamond concentration of 25%, the size of 200*35*10. Grain is in microns:
- 1st bar 160/125- 50/40 - 2nd bar 20/14-7/5
* Leather cases are sold separately for 100 rubles/pcs. (Indicate it in the message to the manager while filling the order form).

$ 15

Abrasive paper

Grain P180 P240 P400 P600 P1000, size 28h230 mm. Waterproof abrasive paper 3M Wetordry of 734 series, it is produced with using silicon carbide minerals with extremely high cutting capacity. It is intended for manual grinding with water.
Microthin abrasive paper 3M of 401Q series. Grain is P1500 and P2000, size is 28h230 mm.

$ 15

Set of Dialux polishing pastes

Set of Dialux polishing pastes. Gray paste is for stainless steel, it has coarse grain. White is the universal finishing paste for all types of metal.

$ 25

Leather strop for refinement with a handle (yuft)

Leather strop is intended for final refinement of knife cutting edge. The inner side of leather is to paste with polishing paste (various companies provided as a rule a green paste; it can used GOI polishing paste). The correction of knife is to make by gently sliding in line with sharpening angle. The smooth side of leather is to use without paste or with finishing (white) paste. Easy steps can bring the blade of knife to the razor sharpness. The main thing here is not to overdo it and to polish the cutting edge not to a convex lens. The knife will shave, but not so good to cut.

$ 15

Double-sided leather strop on the blank (yuft)

Leather strop is intended for final refinement of knife cutting edge. Leather corrects unevenness of cutting rim and makes it stronger. Working surface is made of very smooth, high quality leather, mounted on a wooden blank. Size 170х30х10 mm

$ 15

Leather on the aluminum form 1 piece

Form a leather for the final finishing of the blade cutting edge with. Leather corrects uneven cutting edge, and amplifies it. The working surface is made of a very smooth high quality cowhide, glued to form a durable aluminum. Work blank leather only on themselves. Length of form 150mm, width 25mm, thickness of the leather 3mm thickness 3mm blank

$ 15

Grinding the silicon carbide grains

Grinding the silicon carbide grains

$ 10

Liquid abrasive stones (50 ml)

Branded cutting fluid (coolant) from the company TC Profile, Russia, specifically designed for abrasive bars of different models. Coolant easier to work on the stone edge eliminates local overheating during prolonged monotonous work, improves the performance of stones, reduces clogging and wear different types of stones.
Non-toxic;
Environmentally friendly;
Biorazlogaemy;

Additional accessories

$ 0

$ 105

Case

Convenient packaging for storage and transporting the «Profile» with accessories.

$ 5

Case for diamond stones

Case for diamond stones.

$ 50

Digital angle protractor

The range is 0-360°, the accuracy is 0,1°. Solid aluminum case, large and bright LCD screen, magnets for hard fixation on the surface, functions of calibration and measurement's storage.

$ 20

Holder for angle protractor

Modern digital angle protractors have a small size, built-in magnets, high accuracy (a few tenths of degree), with the function of angular spatial memory, they are affordable. It is obvious that the use of digital angle protractors in sharpening devices in which the main parameter of the geometrical measurements is the angle is fully justified.

$ 8

Wrenches for clamps 3 pcs

Additional Torx wrenches T8, T10 and T15 for usability of clamps.

$ 45

Plate

Metal base is intended to hold the sharpening fixture on the working surface of a table or workbench. It serves to hold the device body on the working surface without use any clamps. It makes it possible to place the system “Profile” without using the edge of the worktable. It is also useful in case if the use of clamps is difficult. The design of base is made in accordance to the style of all system, it perfectly completes the construction giving the device stability and giving the user surety and comfort during the sharpening process. For the purpose to fix your device on the plate set it in the specially provided place and tighten fixing screws. The screw heads are made in the form of butterfly and are to tighten by hand without the use of any special keys. When the process is finished loosen the screws and remove the device chassis from the plate.

$ 8

Glue for blanks, spray 75 ml

Glue for blanks, spray 75 ml.

$ 10

Aluminum blanks (5 pcs)

Aluminum blanks for stones and leather 155x25mm with chamfer of 45 degrees.

$ 10

Blanks of Plexiglas for emery paper, leather 5 pcs

Blanks of Plexiglas with a thickness of 6mm intended for the abrasive’s size 170x30. It can be used with emery paper, leather or stones for stiffening.

$ 50

Narrow holder for abrasives

Narrow holder for holding narrow and not large abrasives.

$ 15

Case for abrasive stones

It is soft and strong nylon case for transporting of abrasive stones. Case is optimized for 6 pieces. The maximum length of stones is 160 mm. The case has Velcro strips for closing the content. The case has the firm’s stripe «TS Profile».

$ 10

60x illuminated pocket microscope

An indispensable tool for control the blades in every detail. It allows to look for sharpening burrs, to control sharpening angle across the all length of the blade, to objectively assess the sharpness and polishing of the blade, see blade with high magnification and achieve a perfect sharpening.

$ 10

40x illuminated magnifier

An indispensable tool for control the blades in every detail. It allows to look for sharpening burrs, to control sharpening angle across the all length of the blade, to objectively assess the sharpness and polishing of the blade, see blade with high magnification and achieve a perfect sharpening.

$ 33

Digital USB microscope

It allows to make photos of blade with magnification up to 500 times. Share your experience in sharpening knives, discuss sharpening results with your colleagues, and make photos of perfectly knife edge, compare the different techniques of sharpening, abrasives and grinding apparatuses.

Systems and accessories

  • Profile K01 2016
  • Profile K02 2016
  • Abrasives for sharpening

Are you looking for a specific system or component?

Leave a request for a free consultation from a specialist

To get a consultation

Good discount on knifes from master Pampukha

Igor Yurjevitch Pampukha

Igor Yurjevitch Pampukha is one of the best Russian blacksmiths, a member of the Creative Union "Guild-armourers", permanent participant of many Russian and international exhibitions, winner of the international exhibitions like "Blade", "Arms and Hunting", "Hunting and fishing in Russia".

Master-blacksmith

Our partner

A member of the Creative Union
"Guild-armourers"

How are we working

Online Order

We will call you back within 5 minutes

Order generation

Model configuration, abrasives, quantity in pieces

Production

We produce sharpening system that you need

Delivery

We send the order
by convenient way for you

1 2 3 4

Confidentiality of personal data

This privacy policy applies to all visitors and users of this website. Website user needs to read carefully these Terms and Conditions.

The user authorizes the processing of his personal data that are providedfrom him in the questionnaire placed on the site Techno Studio.

Techno Studio uses all of the provided voluntarily by the user information for the processing of information and educational services.

No personal information about an individual user is not disclosed, except the cases provided by law.

Read more about delivery

The shipment is possible all over the world where post is available. The shipment Russian Post costs 1000 rubles. The shipment by transport companies is possible but in this case the delivery cost will depend on the chosen transport company, country and city of recipient. Delivery to the terminal placed in the city Izhevsk costs 300 rubles. We work with transport companies “Kit” and “Delovye linii”. Unfortunately, at the moment we do not ship COD. Pickup by agreement with the manufacturer.

We produce and ship the goods in small quantities. We do not keep stocks for a number of reasons. When you are ordering, the manager will inform the deadline to submit the nearest party. As a rule, order delivery time is 25 to 40 calendar days after buyer payment.

Please include your full shipping address, city code, recipient's name, phone number. We will contact you to confirm your order before shipping. Orders will not be sent without this data.

Read more about payment

Transfer to Sberbank card. When transferring from the Sberbank card the commission fee for the transfer is 0-1,5%. At other banks the commission may vary, it is usually 1.5-2%.

Uniteller. Transfer fee is 2.9%

PayPal. Transfer fee is 4%.

Qiwi-purse. Transfer fee is 2%.

Western Union. The transfer fee on Western Union tariff rates depends on the country of dispatch and transfer amount.

Blitz transfers "Kolibri", "Golden Crown". The transfer fee is also on tariff rates of these organizations. It depends on country and transfer amount.

Returns of order or order cancellation

The order can be canceled before dispatch, please contact us by email or telephone and inform about the order cancellation. In this case the advanced amount for the order will be fully refunded, minus the commission of the bank (if any).

The goods can be returned within 7 days after receipt of order. In this case please contact us by email or phone, inform us of your intention to return the item specifying the order number. Send the goods by post to the following address: 426067, Russia, Izhevsk, Truda-street 30-49. Request for return of the goods shall be considered within 10 working days after receipt of the goods by the seller. Please keep the dispatch check of the goods till you receive the information document that your refund was received by the seller. In case of return of qualified goods the shipping costs are to pay by the buyer. If you return a faulty item, the shipping costs are to pay by the seller.

Refund is possible only if the goods have marketable condition. The solution of any problems is by agreement.

Orders in cart: 0 Total cost: $ 0